GoldenrozBook a call

What is a PBX? Cloud vs on-premises phone systems

A PBX (private branch exchange) is a company's private phone system. It routes calls between internal extensions, connects them to the public telephone network and provides features such as auto attendants, call queues and voicemail. A PBX can run on equipment in your building or be delivered as a cloud service, and modern systems carry calls over the data network using VoIP.

A gold sphere under a clear glass dome on a navy base.

What a PBX does

Without a PBX, every phone in a company would need its own line from the telephone carrier, and a call to a colleague at the next desk would go out to the public network and back. A PBX removes that. Internal calls stay inside. External calls share a pool of connections to the carrier.

The core functions have not changed in decades:

  • Extensions. Short internal numbers for people, rooms and devices.
  • Call routing. Rules that decide where an incoming call goes by number dialed, time of day and availability.
  • Auto attendant. The recorded menu that answers and offers options.
  • Call queues and ring groups. Calls held in order or offered to a team.
  • Voicemail, transfer, hold, forwarding and conferencing.
  • Call records. Who called whom, when and for how long.

What changed is how the calls travel. Older PBXs switched analog or digital circuits over dedicated phone wiring. An IP PBX carries voice as data packets over the same network as your computers.

The terms you will hear from vendors

Term Meaning
PSTN Public switched telephone network: the global network of phone lines, mobile networks and switches that connects phone numbers
VoIP Voice over IP: carrying calls as data packets over an IP network
SIP Session Initiation Protocol: the standard signaling protocol that sets up, changes and ends VoIP calls
SIP trunk An IP connection between your phone system and a carrier, replacing physical lines
DID Direct inward dialing: a public number that reaches one extension directly
SBC Session border controller: a device or service at the edge of the voice network that secures and translates SIP traffic
UCaaS Unified communications as a service: cloud calling combined with meetings and messaging
Softphone A phone that is an application on a computer or mobile device

SIP trunks in practice

A SIP trunk is how an IP PBX reaches the public network. Three properties matter when you order one:

  • Channels. The number of calls that can be in progress at once. Size it from your busiest hour, not from your headcount.
  • Numbers. Your DID ranges are attached to the trunk and can usually be ported from your old carrier.
  • Failover. What the carrier does with incoming calls when your site is unreachable, for example forwarding to mobile numbers.

Cloud PBX vs on-premises PBX

On-premises PBX Cloud PBX
Where it runs A server or appliance at your site The provider’s data centers
Who maintains it You or your integrator The provider
Cost shape Purchase, licenses, support contract, SIP trunks Per user per month, plus calling plans
Internal calls during an internet outage Keep working on the local network Stop, unless phones fall back to mobile apps on cellular data
Remote and mobile users Possible, needs secure remote access Built in
Adding a user May need hardware or license changes A license assignment
Integration with analog and special devices Direct, through gateways you control Through adapters or a local gateway
Control over upgrades and features Yours The provider’s schedule

There is also a middle option: your own PBX software running on a virtual server in a data center or public cloud. You keep control and avoid on-site hardware, and you still carry the maintenance.

When each fits:

  • Cloud suits offices with good internet, distributed or mobile staff, and no telephony specialist on the team.
  • On-premises suits sites where internal calling must survive a link failure, sites with many analog devices such as intercoms, paging and door phones, and organizations with rules about where call data is kept.
  • A mix is common: cloud calling for office staff and a local gateway or small PBX for the plant floor.

VoIP vs landline

VoIP Traditional landline
Carried over Your data network and internet Dedicated copper pairs from the carrier
Works in a power cut Only with battery backup for phones, switches and router Often, because the line is powered by the carrier
Cost per line Usually lower Usually higher
Features Rich, added in software Basic
Moving or adding lines Configuration A carrier visit
Remote work Yes No
Call quality Depends on network quality Consistent
Emergency calls Location must be configured and kept current Tied to the line’s address

For business calling, VoIP is the default today. Before you cancel the last analog lines, list what is connected to them: alarm panels, elevator phones, fax machines, payment terminals and gate intercoms. Each needs a tested replacement.

Teams Phone vs Zoom Phone: how the cloud options are built

Many organizations choose a cloud PBX from a vendor whose meeting software they already use. Microsoft Teams Phone and Zoom Phone are two examples. Both provide the PBX features above inside an application people already have open. The decision usually turns on how each connects to the public network.

Microsoft documents four PSTN connectivity options for Teams Phone:

Option Who is your carrier What you operate
Microsoft Teams Calling Plan Microsoft Nothing beyond licenses
Operator Connect A certified third-party operator, managed from the Teams admin center A contract with the operator
Teams Phone Mobile A certified mobile operator, using the user’s mobile number A contract with the operator
Direct Routing Any carrier you choose A certified session border controller, run by you, an integrator or a hosted provider

Microsoft also notes that these options can be combined in one tenant, for example Calling Plans for most users and Direct Routing for a site with special requirements.

Zoom Phone follows a similar split. Zoom offers its own calling plans where it acts as the carrier, and a Bring Your Own Carrier option that, in Zoom’s words, lets customers keep their existing service provider contracts, phone numbers and calling rates.

Compare the two on your own facts: which suite your users already work in, whether your carrier and countries are supported, which desk phones and analog devices you must keep, and how contact center or call recording needs are met. Check current licensing and prices on each vendor’s site. We do not resell either product.

Network readiness

Voice is the least forgiving traffic on a network. An email that arrives two seconds late is fine. A voice packet that arrives late is useless. Three measurements describe voice quality: latency (delay), jitter (variation in delay) and packet loss. Each vendor publishes target values for its service, and you should test against those.

A readiness checklist:

  • Run the vendor’s network assessment tool from each site, at busy times
  • Put phones on a dedicated voice VLAN
  • Configure quality of service so that voice is prioritized on switches, the firewall and the WAN link
  • Confirm switch ports provide enough Power over Ethernet for the desk phones
  • Check Wi-Fi coverage and roaming where softphones and mobile apps will be used
  • Review firewall rules and disable SIP helper features that rewrite voice traffic unless the vendor requires them
  • Size internet bandwidth for peak simultaneous calls on top of normal traffic
  • Provide a second internet link or cellular failover for sites that cannot lose calls
  • Put switches, router and any on-site PBX on battery backup
  • Record a location for every phone and softphone for emergency calling

Most call quality complaints after a migration are network problems, which is why the phone project and network management services should be planned together. Where the network itself needs redesign, including switching, segmentation and site links, that is IT infrastructure services work.

Emergency calling

In the United States, two federal laws apply to multi-line telephone systems. Kari’s Law requires that users can dial 911 directly, without a prefix such as 9, and that a notification is sent to a point in the organization when a 911 call is made. Section 506 of RAY BAUM’s Act requires that a dispatchable location, meaning a street address plus details such as floor or room, is conveyed with 911 calls. States may add their own requirements. Ask every vendor how its system meets both, especially for remote workers and softphones. This is a technical summary, not legal advice.

Number porting

Porting moves your existing numbers to the new carrier. FCC rules require simple ports to be completed within one business day and non-simple ports within four business days, unless the new provider or the customer requests longer. Business ports with many numbers are usually non-simple and are scheduled in advance.

A porting plan:

  1. Collect a full inventory of numbers from carrier bills, including fax, alarm and toll-free numbers.
  2. Get the customer service record from the current carrier and match the account name, address and authorized contact exactly. Mismatches are the most common cause of rejected port requests.
  3. Sign the letter of authorization for the new carrier.
  4. Build and test the new system on temporary numbers first.
  5. Agree a port date and time outside business hours where possible.
  6. Do not cancel the old service until the port is confirmed complete. If the account is closed first, the numbers may no longer be available to port.
  7. Test inbound and outbound calls on every number range after the port.

What to ask vendors

  • What happens to incoming and internal calls when our internet link is down
  • Which of our existing desk phones and analog devices are supported
  • How emergency calling and location are handled for office, remote and mobile users
  • Who is the carrier of record for our numbers, and can we port them away later
  • What the service level agreement covers and what the remedy is
  • Where call recordings and call records are stored, and for how long
  • What is included per user and what is billed by usage
  • What the contract term is, and what it costs to reduce users or leave
  • Who does the migration work, and who supports us afterward

What to do next

Build the inventory before talking to vendors: every number, every line, every device connected to a phone port, and the call flow for each main number. Then run a network assessment at each site.

We design, migrate and cut over phone systems as a project through our business phone systems service, starting at $25,000 at a fixed price per phase. Goldenroz is independent and is not a partner or reseller of Microsoft, Zoom or any carrier. Running the network and the phone system afterward is available under managed IT services, a monthly retainer quoted after an assessment. If part of your telephony will stay on site while the rest moves, see what is hybrid cloud.

Questions buyers ask

What does PBX stand for?

PBX stands for private branch exchange. It is a telephone switch owned or rented by one organization, used to connect its extensions to each other and to the public telephone network.

What is the difference between a cloud PBX and an on-premises PBX?

An on-premises PBX runs on hardware or a server at your site and you maintain it. A cloud PBX, also called a hosted PBX, runs in a provider's data centers and you pay per user per month. Both give the same core features. They differ in who operates the system, how costs are spread and what happens when the internet link fails.

What is a SIP trunk?

A SIP trunk is a connection, delivered over an IP network, between your phone system and a telephone carrier. It replaces physical phone lines. The number of simultaneous calls it carries is a setting, not a count of copper pairs.

Is VoIP better than a landline?

For most business calling, yes. VoIP supports remote and mobile users, adds features without new wiring and usually costs less per line. Its weaknesses are dependence on power and network quality, and extra care needed for emergency calling. A traditional line still suits a few uses, such as some alarm and elevator lines.

Can I keep my phone numbers when I change phone systems?

In the United States, yes in most cases. The FCC's rules require carriers to port numbers, with simple ports completed within one business day and other ports within four business days unless a longer period is requested. Keep the old service active until the port is confirmed complete.

Written by

CTO and technology partner

Shai leads the technology side: business software, SaaS and mobile apps, payments and escrow systems, Postgres security, AI agents built with Claude Code and MCP, and IT and infrastructure projects with senior infrastructure engineers.

Keep reading

Talk to the person who will do the work

One hour, no sales team. You talk to Daniel or Shai, we look at your account or your product, and you leave with a clear next step.

Or send the details

Book a 1-hour consultationWhatsApp us