Manufacturing software development for plants whose ERP stops at the shop floor door
Manufacturing software development at Goldenroz is the build of shop floor applications, traceability records, quality workflows and dashboards that connect operators and machines to the ERP you already run. It is for manufacturers whose process is not covered by a standard product, or covered only by one that costs too much to adapt. Shai, our CTO, does the engineering. Projects start at $25,000 at a fixed price per phase after a free one-hour scoping call, and larger systems run $100,000 and up.
From $25,000, fixed price per phase
Updated 2026-11-14. By Shai Goldenberg
What usually goes wrong
- Paper travelers and end-of-shift data entryOperators write quantities and scrap on a sheet that follows the job. A supervisor types it into the ERP hours later.
- A traceability request you cannot answer quicklyA customer asks which lots of raw material went into a shipped serial number. The answer is in three binders and a spreadsheet, and it takes days.
- Machine data that never leaves the machinePLCs and controllers know cycle counts, states and alarms. None of it reaches the people planning the next shift.
- Quality records scattered across formsInspections, nonconformance reports and corrective actions sit in separate documents, so an auditor's question turns into a search.
What is included
- Shop floor appTablet and kiosk screens for starting and stopping operations, reporting good and scrap quantities with reason codes, and scanning lots, built for gloves and bad lighting.
- ERP integrationWork orders, bills of material, routings and inventory transactions exchanged with systems such as SAP, Epicor, Infor or NetSuite through the interface each one offers. Priced per integration.
- Lot and serial traceabilityEvery consumption and production event stored as an append-only record with user and time, so genealogy runs forward and backward in seconds.
- Quality workflowsIn-process inspections, nonconformance reports with photos, holds and corrective actions tied to the work order they came from.
- Machine data intakeCounts, states and alarms read from an OPC UA server or MQTT broker that your controls integrator exposes. Read-only, with no changes to control logic.
MES software and manufacturing ERP: what to buy and what to build around them
If you are comparing MES software products, start there. A packaged manufacturing execution system suits plants with standard discrete or process flows and the budget to implement one. The same goes for the planning and finance record: a manufacturing ERP is something you buy, and nobody should build one.
Custom work earns its place in the gaps. An ERP for manufacturing plans the order and counts the cost, but it rarely gives an operator a usable screen at the machine. A full MES may be more than a mid-size plant needs, when the real problem is one cell, one traceability requirement or one quality loop. A focused application covers that gap and writes its results back to the ERP.
We say on the scoping call when a packaged product is the better answer. The general approach to build-or-buy is on the business software page.
Industrial software development on the shop floor: networks, downtime windows and customer rules
Industrial software development has constraints an office project does not. The control network is separated from the business network for good reason, so machine data crosses through a defined gateway and never the other way. Wi-Fi drops between steel racks, so the operator screen has to queue transactions and sync when the signal returns.
Customers and regulators add their own requirements. Defense suppliers handling controlled unclassified information face NIST 800-171 and CMMC. Goldenroz builds and documents the technical controls in the software, such as access control, audit logs and record retention. We are not a C3PAO or an auditor.
How the work runs
Scoping call
Before the projectA free one-hour call with Shai. We go through the process, the systems you already run and whether a product you can buy would do the job. You leave with a list of phases and a fixed price for the first.
Process and data model
Week 1Entities, statuses, roles and integration points are decided and documented with the people who do the work. This is the part that is expensive to change later.
Foundation
Weeks 2 to 3Login, roles, permissions, the core tables and the deploy pipeline go live on staging before feature work starts.
Feature phases
Phase by phaseEach phase has a fixed scope and price and ends with working software on staging. A small group of real users tries it, and you approve it before the next phase is priced.
Rollout and handover
Final phaseData import from the old tools, user training, production cutover, monitoring and documentation. Maintenance and support after launch are quoted separately.
What it costs
Every project is split into phases. Each phase has a fixed scope and a fixed price, agreed before work on it starts. Hosting, licences and third-party services are paid directly by you.
- Business system, first phase and smaller systemsFixed price per phaseFrom $25,000
- Larger systemsWeb, mobile and several integrations, scoped one phase at a time$100,000 and up
- Maintenance and supportAgreed after launch, not requiredQuoted separately
- Scoping callOne hour with Shai$0
- Code ownershipRepository in your organization from day oneYours
Who it is not for
- PLC programming, firmware, sensors or any change to machine control logic.
- Plants whose needs a packaged MES or ERP module already meets. Buy it.
- Validated systems for regulated production where the vendor must supply formal validation documents.
Who does the work
Shai leads the technology side: business software, SaaS and mobile apps, payments and escrow systems, Postgres security, AI agents built with Claude Code and MCP, and IT and infrastructure projects with senior infrastructure engineers.
Questions buyers ask
How much does manufacturing software development cost?
At Goldenroz, projects start at $25,000 at a fixed price per phase, and larger systems run $100,000 and up. A first phase usually covers one line or one workflow plus one ERP integration. You get the price in writing after a free one-hour scoping call. See pricing.
Will you replace our ERP?
No. The ERP stays as the planning and financial record. We build the layer between it and the floor and exchange data both ways through the ERP's supported interface, with validation so a bad transaction is rejected before it posts.
Is Goldenroz an IoT development company?
Only for the software side. We read data from gateways, OPC UA servers and MQTT brokers and build the applications on top. If you need an IoT development company for sensors, firmware or PLC programming, that is a different supplier.
How do you roll out without stopping production?
One line at a time. The new application runs in parallel with the current process until counts match, then that line switches over.
Do your manufacturing software development services come with plant references?
No. We are a two-partner firm, and our manufacturing software development services rest on general engineering evidence, not sector case studies. A buyer who needs a manufacturing software development company with a list of plants should choose a specialist. Manufacturing web development for supplier and customer portals is scoped the same way.
Guides on this topic
- A 5-year cost model for build vs buy software, one company's real subscription figures, and the cases where buying off the shelf is still the right call.
- SPFx is Microsoft's model for customizing SharePoint with TypeScript code that runs in the browser. Learn the component types, deployment and what to govern.
- How the WhatsApp Business API works: Cloud API, templates, the 24-hour customer service window, per-message pricing and the setup steps. See what to plan for.
More for manufacturing
Software development by industry and stage
- Business software
- Android app development
- App and software development cost
- Software development for automotive
- Software development for construction and field service
- Custom CRM development
- Custom ERP development
- Custom software development
- Customer and employee portals
- Dashboards and internal tools
- Dedicated team and staff augmentation
- Delivery and on-demand apps
- Digital transformation consulting
- Software development for ecommerce
- Software development for education
- Software development for enterprise
- Finance and accounting software
- Software development for fintech and banking
- Software development for fitness and sports
- Fractional CTO
- Full-stack development
- Software development for healthcare
- HR and payroll software
- Software development for insurance
- Inventory and order management software
- iOS app development
- Software development for law firms and legal
- Legacy modernization
- Software development for logistics and transportation
- React and Node.js development
- React Native app development
- Software development for real estate
- Software development for restaurants, hotels and travel
- Software development for small and mid-size business
- Software consulting
- Software project rescue
- Software development for startups
- Web application development
- Web development
- WordPress development
- Software development
Talk to the person who will do the work
One hour, no sales team. You talk to Shai Goldenberg, the CTO, about your systems or your product, and you leave with a clear next step and a price range.